Puratek Deluxe RO/DI Filter – Vertex

Description

**THIS FILTER HAS BEEN DISCONTINUED, WE RECOMMEND THE ICECAP RO/DI FOR A SIMILAR ALTERNATIVE**

Reserse Osmosis and De-ionization water purification system for residential or industrial use. Available in 100 or 200 gallon per day models.

• ~1:1 Pure/Waste water ratio (source water temperature dependant)
• Fully-Automated water management
• Professional grade digital TDS meter
• Easy to view precision Oil-filled pressure gauge
• Automatic backflush system prevents TDS creep
• High-pressure electronic shut-off for reservoir use
• High efficiency booster pump

Features

Reverse Osmosis and De-ionizationSystems

Procuring pure water rests at the very baseline of success for the modern aquarist. Vertex Aquaristik rises to this challenge with the conception of the Deluxe Puratek RO/DI water filter. Through sound component selection and optimization of contaminant extraction, Deluxe Puratek RO/DI units minimize energy use, water consumption and media replacement.

PURE WATER, TROUBLE FREE

The on-board microprocessor controller enables every Deluxe Puratek RO/DI unit to function with full automation. At set intervals, the unit will perform routine system backflushes, preserving the longevity of the membrane and efficiency. The unit is further featured with a shut-off solenoid which halts all water transit during instances of backpressure or loss of power to the controller.

MAXIMUM COMPATABILITY AND EFFICIENCY

Each Deluxe Puratek RO/DI system is furnished with a Vertex HP-100 Booster Pump, enabling the setup to operate at the lowest source water pressures. By closely monitoring the water input, Deluxe Puratek RO/DI systems are amongst the most eco-friendly units, producing pure water with absolutely minimal waste.

FUNCTIONALLY CONVENIENT

A processor controlled digital output TDS meter tracks water purity and performance. The oil-filled pressure gauge makes for easily visible system operating standards. A set of clear, easy-to-view canisters are unmistakably visible indicators of cartridge life. Finally, standardized fittings and cartridges remove all suppositions from installation and replacement routines.

Specifications

• Footprint 15″ x 8″
• Height 18″
• GE-100 GPD or 200 GPD membrane
• 5 polypropylene sediment cartridge
• 10 carbon block cartridge
• High capacity resin DI cartridge
• Vertex HP-100 booster pump
• All “push-connect fittings
• Includes canister wrench and all installation adaptors and fittings