AQUARIO NEO Skimmer

NEO SKIMMER OFFERS THE BEST OIL FILM REMOVAL CAPABILITY WITH MINIMAL DESIGN.

Principle of oil film removal
The oil film that has passed through the Neo Skimmer is crushed very finely and loses its flotation.
Eventually, it enters the inlet of various filters and is biologically decomposed.

Why not?? Change it!!

IT DOESN’T TAKE UP SPACE.

The largest product, L size, isonly 4 cm wide and 4.5 cm high.

IT CONNECTS TO NOT INLET, BUT THEOUTLET.

IT DON’T NEED ELECTRICITY.

Based onBernoulli’s principle, it uses the correlation between flow velocity and pressure.

IT DOESN’T TRAP CREATURES

Since it is located at the outlet, any creature that enters the skimmer is immediately discharged.

IT’S EASY TO ADJUST

The ability to remove the film can be adjusted by moving the part up and down and rotating the left and right sides.

AERATION IS POSSIBLE.

Aerationis possible when setting high level

How to use

DO NOT SET THE CUTTING SURFACE IN THE OPPOSITE DIRECTION OF THE WATER EXIT. INSERT THE VERTICAL PART DEEPLY AND ADJUST THE OIL FILM REMOVAL ABILITY BY TURNING THE VERTICAL PART LEFT AND RIGHT.

IF THE SKIMMER IS EXPOSED OUTSIDE THE WATER BY KEEPING THE WATER LEVEL LOW, CUT THE LONG SIDE OF THE PIPE AND CONNECT IT WITH THE SKIMMER.

Complete oil film removal in just 16 minutes

60*30*36 tank

Medium-Inner diameter of connection part :
about 13mm

Large-Inner diameter of connection part :
about 17mm